MLTSM  photo a3902f34-4bb9-4889-866b-d6c00914936d.jpgMuzzle loading target shooters Forums  photo bb9977a3-5847-47f4-ade3-17c1e6670c48.jpg http://prwarner.wix.com/mlts-masters Email mlts.masters@gmail.com

You are not logged in. Would you like to login or register?



11/05/2015 12:04 AM  #1


.36 caliber offhand rifle.....

wanted to get some opinions or experience on building a .36 caliber roundball rifle.  have some experience with .40's, and mostly .45's in my offhand guns.  but, the thought has always crossed my mind.  since 2/3-3/4 of the shootng is at 25 and 50yds, it would seem to make some sense........
will it hold up at 100yds?  or, is it just to wind dependent (or lack thereof)?
thanks.
Jim

 

11/05/2015 6:54 AM  #2


Re: .36 caliber offhand rifle.....

Interesting! I just purchased a .36 barrel myself to build a offhand rifle this winter. Mainly for fun times when I want to go to the range and just get in some offhand practice at 25 and 50 yards and just because I want one. I'm new to the .40's and still learning that one, but a long time .45 shooter and I think that it is a great offhand rifle out to 100 yards. I don't have much faith in a .36 at 100 yards but will be giving it a work out when I get it together just because curious minds want to know?

RB


One good shot doesn't make a match but one bad shot dang sure can ruin a match!
 

11/08/2015 3:19 PM  #3


Re: .36 caliber offhand rifle.....

I've got a rifle with a straight octagon .36 caliber, Douglas barrel that is 42" long and 13/16 across the flats.  It has enough weight to hold pretty steady off hand.  With the 1:66 twist rate Douglas used, it takes a stiff load (60 grains of 3fg Swiss) to produce a tight group, which it certainly will.  Perhaps because of the extra velocity produced by the heavier load, it isn't any more prone to wind drift than a .40 caliber.  If you already have a good performing .40 off hand rifle, I'm not sure what, if any, benefit you'd gain by building a .36 caliber off hand rifle.  Of course with a lighter charge of powder, my .36 caliber doubles as a small game rifle.

Don R. 


NMLRA Field Rep Coordinator 
Region 3 (Southeastern States)
 

11/09/2015 1:09 PM  #4


Re: .36 caliber offhand rifle.....

Wow 60 grains of Swiss 3FFF are you getting any blow-by, burnt patches? I not really trying to build a super match rifle just a fun gun type thing. Cheap on powder and lead!

RB


One good shot doesn't make a match but one bad shot dang sure can ruin a match!
 

11/09/2015 4:36 PM  #5


Re: .36 caliber offhand rifle.....

RB,

No blow-by or burnt patches.  I use a bore size .360 ball, .023 tightly woven cotton canvas patches, and Mr. Flintlock or Lehigh Valley Patch lube.  I use a wet patch for target shooting and never have to wipe between shots even if I shoot all day with that setup.  The barrel is coned to allow easier starting of the patch and ball at the muzzle.  After it goes down the first 3 inches or so it will slide right down the barrel.  

With a faster twist rate more typical in a .36 caliber, a much lighter charge of powder would most likely do just fine.  My understanding is that for some reason Douglas used a 1:66 twist rate in all their barrels.  Works okay, but for the littler calibers you need a pretty good charge of powder to tighten the groups up.  I've probably got in the neighborhood of 3,000 shots through that gun.  Though that hot charge enlarges the hole in the touch hole liner enough after about 1,000 shots that it needs to be changed to maintain accuracy, I'm very happy with the way it shoots.

Don R.

Last edited by MoleEyes (11/09/2015 4:37 PM)


NMLRA Field Rep Coordinator 
Region 3 (Southeastern States)
 

Board footera

 

Powered by Boardhost. Create a Free Forum

Three things you must remember while target shooting. (1) Align the sights carefully. (2) Squeeze the trigger. (3) Say how did it get over there. http://prwarner.wix.com/mlts-masters